Classification of loudspeakers

Nov 21, 2024

Leave a message

 

In addition to the function of amplifying signals and driving loudspeakers to amplify sound, frequency-shifting amplifiers can also effectively suppress on-site howling and ensure the quality of voice transmission. Even in poor environments, they can also suppress howling to the greatest extent and protect audio equipment from burning out due to howling.

Frequency-shifting amplifiers are widely used in high-end multimedia classrooms, training rooms, small conference rooms or other simple sound reinforcement occasions. Microphones can be directly connected to frequency-shifting amplifiers, which can effectively suppress the howling caused by microphones to speakers, and support background music access for sound reinforcement.

According to the different conduction methods of the power amplifier tubes in the power amplifier, it can be divided into Class A amplifiers (also known as Class A), Class B amplifiers (also known as Class B), Class AB amplifiers (also known as Class AB) and Class D amplifiers (also known as Class D).
Class A amplifiers refer to a type of amplifier in which any power output element of the amplifier will not have current cutoff (i.e. stop output) during the entire cycle of the signal (positive and negative half cycles of the sine wave). Class A amplifiers generate high heat when working and have very low efficiency, but their inherent advantage is that there is no crossover distortion. Single-ended amplifiers all work in Class A mode, and push-pull amplifiers can be Class A, Class B, or Class AB.
Class B amplifiers refer to a type of amplifier in which the positive and negative half cycles of a sinusoidal signal are amplified and output by the two "arms" of the push-pull output stage in turn, and the conduction time of each "arm" is half a cycle of the signal. The advantage of Class B amplifiers is high efficiency, and the disadvantage is that they will produce crossover distortion.
Class AB amplifiers are between Class A and Class B, and the conduction time of each "arm" of the push-pull amplifier is greater than half a cycle of the signal but less than one cycle. Class AB amplifiers effectively solve the crossover distortion problem of Class B amplifiers, and their efficiency is higher than that of Class A amplifiers, so they have been widely used.
Class D amplifiers, also known as digital amplifiers, use extremely high-frequency switching circuits to amplify audio signals, and have the advantages of high efficiency and small size. Many Class D amplifiers with a power of up to 1000W are only as big as VHS video tapes. This type of amplifier is not suitable for use as a broadband amplifier, but it has many applications in active subwoofers.

 

info-750-750

 

Send Inquiry