What role does sound-absorbing cotton play in speakers?

May 28, 2025

Leave a message

Sound-absorbing cotton plays a vital role in the sound system. Its main function is to absorb the reverse sound waves generated by the speaker, thereby adjusting the Q value and eliminating standing waves. The amount of sound-absorbing cotton to be placed needs to be determined through precise calculations and experiments. The usual practice is to stick a layer of sound-absorbing cotton about 1 cm thick on the inner wall of the speaker. But please note that the sound-absorbing cotton mainly affects the treble part and has no significant change on the bass effect.

In the speaker, the role of sound-absorbing cotton is not limited to adjusting the sound. It can also absorb part of the sound waves behind the speaker to avoid the sound being too turbid and make the sound quality clearer. For consumers, you can increase or decrease the sound-absorbing cotton appropriately according to your personal hearing experience, but be sure to make sure it can be restored to its original state.

 

In a closed box, the amount of sound-absorbing cotton can be slightly more, while in a bass reflex box, it should be reduced appropriately. The best practice is to evenly stick the sound-absorbing cotton on all six sides of the speaker, which can be fixed with milky white glue.

 

It is very necessary to add sound-absorbing cotton to the speaker, especially when the speaker box is not strong enough. In this case, the cabinet will vibrate with the vibration of the woofer, generating a low-frequency signal that is opposite to the speaker phase, thereby weakening the speaker's low-frequency performance. To solve this problem, sound-absorbing cotton can be added to the cabinet to reduce the impact of the sound waves on the cabinet from the back of the speaker and prevent the cabinet from vibrating.

 

However, it should be noted that while the sound-absorbing cotton absorbs the sound waves, it also weakens the sound waves transmitted from the guide hole, which may reduce the bass performance. Therefore, when placing the sound-absorbing cotton, multiple factors need to be considered, such as the firmness of the cabinet and the type of speaker (guided or sealed).

 

In general, the amount of sound-absorbing cotton added should be determined according to the overall sound effect of the speaker. If the resonance sound of the cabinet is too loud, you can add a proper amount of sound-absorbing cotton to reduce the resonance. However, too much sound-absorbing cotton may make the sound dull, so it should be added with caution.

 

If sound-absorbing cotton is not placed in the speaker, it may cause sound resonance and unclear sound quality. Therefore, the reasonable use of sound-absorbing cotton is crucial to improving the sound quality of the audio system.

Send Inquiry