Of course, it is not enough to just look at the high-powered description. A high-quality amplifier must also be able to quickly respond to the peak of the music signal, while being able to respond to powerful heavy bass and providing a smooth output with low distortion/low noise. To meet these requirements, the following points must be met: First, a high-performance power supply. This is the key to the sound quality of the amplifier. The power supply and amplifier should be designed separately to reduce noise. A large step-down transformer is used to increase the supply of stable current, and a large capacitor can respond more quickly to supply the current required for amplification. Second, a built-in parametric equalizer. Car audio is very different from home audio. The installation location of the speaker is very limited, and sound adjustment is very important. In addition, the sound effect of the car audio system is affected by the sound insulation effect of the headrest and the window, as well as the installation angle of the subwoofer. The sound wave chaos caused by the soundproofing effect of the headrest and the window, as well as the installation angle of the subwoofer, will affect the sound effect of the car audio system. At this time, the parametric equalizer comes into play, which can compensate for the peaks and troughs of the sound waves caused by the above reasons and adjust the sound field to be smooth. Finally, there is the built-in crossover. No matter how good the amplifier's own functions are, when it is actually installed in the car, it will not achieve the best effect due to various sound problems and speaker configuration problems. In order to overcome these, in addition to the parameter equalizer, a crossover must be used. There are two major advantages of a built-in crossover: First, the system is expandable and the amplifier and speakers can be combined freely. Second, it makes adjustments simple and easy. This can improve the sound quality of the entire system. Using an external crossover system is more complicated in wiring, easy to mix with noise, requires a larger space during installation, and increases the price of the system. Therefore, we do not recommend it when choosing a car amplifier.
