
1. AC noise
It is usually caused by poor filtering and shielding of equipment and lines. The shielding of metal shell equipment is better than that of plastic shell equipment. Solution:
- Ground the equipment shell through the wire;
- Replace the well-shielded wire. You can also use an equalizer to cut off the audio below 60Hz.
2. Hissing sound
It is usually caused by poor shielding of microphone cables and audio cables. Well-shielded microphone cables and connection cables should be used.
3. AC hum
It is usually caused by electromagnetic leakage near the amplifier, such as power adapters, power transformers, AC power lines, etc. The amplifier should be kept away.
4. Hissing sound
It is caused by the quality and performance of equipment components; circuit design, circuit board wiring, grounding points, etc., which can be improved by using software to reduce noise or eliminate hissing sound in the later stage.
5. Line induction
The mixed sound of more than one of the above noises caused by poor line shielding should use well-shielded microphone cables and connection cables.
6. Cell phone interference
During the recording process, someone is using a cell phone nearby; the interference is most serious when the cell phone dials and starts to ring. Remember not to place the cell phone near the recording equipment during recording.
