How to eliminate the loud sound of the sound current

Apr 21, 2025

Leave a message

info-1385-482

If the sound current sound, first we need to find out the source of the "sizzling" sound of the speaker, first distinguish the cause, and then solve it in a targeted manner.

1. Generally, the shielding of the connecting wire is poor, or the shielding wire is broken, and it can be solved by changing a new connecting wire.

2. Turn the volume to the lowest, that is, silent. At this time, there should be no sound. If there is a "buzzing" sound, it may be caused by the change of the capacity of the electrolytic capacitor of the power amplifier filter circuit, or the capacity is too small. On the contrary, turn up the volume. If there is a loud "buzzing" sound, it is caused by the poor shielding of the audio input of the power amplifier. Check and eliminate the shielding fault to make the shielding wire grounded well.

3. The outer shell of each original component must be grounded, and the audio input line must use a shielded wire.

4. If the speaker has a "hissing" sound, this situation is mostly caused by poor overall shielding, or the primary and secondary windings of the power transformer are not well isolated. At this time, you can try turning the power plug around. If it still doesn't work, you can connect two 4700P capacitors with a working voltage of 250V in series at the power input end (the power input end of the transformer), and ground the center tap to reduce noise.

Note: When the internal fault involves circuit principles and maintenance technology issues, as well as electrical safety issues and maintenance tools, please send it to a professional for repair.

All speakers have current sounds, just look at what kind of current sound it is.

1. Low-frequency "buzzing" current sound.

The judgment of this current sound is to turn the volume potentiometer to the minimum. At this time, the speaker still has a buzzing sound. The fault is caused by the small capacity of the filter capacitor of the power supply system. The solution is to increase the capacity of the filter capacitor.

 

2. The buzzing sound changes with the volume.

The source of this current sound is that the pre-stage voltage amplifier has a fault. For example, the ground terminal of the audio input line is open, the contact is poor, and the sound source itself has a buzzing sound. Then there is an open circuit or failure of the electronic components in the decoupling circuit in the circuit.

 

3. The current sound is a "squeaking" fault.
This current sound is mostly caused by interference signals. Since the current electrical equipment is high-frequency electrical appliances, such as energy-saving lamps, chargers, inverters, etc., all use high-frequency circuits. If the sound anti-interference function is not good, this phenomenon is easy to occur. You can insert the power plug in reverse, which sometimes works.

Send Inquiry