Loudspeaker Configuration

Nov 24, 2024

Leave a message

 

The speaker system should reproduce various music programs with high quality. According to the properties of the music signal, its peak factor is about 10-15dB. From the perspective of ensuring sound quality, the amplifier should not have any limiting situation within this dynamic range, that is, the maximum output power of the amplifier should be 5-8 times the rated power of the speaker. Although such a power configuration has good sound quality, it will cost a lot of money, so the power ratio is generally set at 1-2 times the rated power of the speaker unit. The range of 1-2 times may be too vague, so we can give you a more specific experience.
1. In some projects with low requirements and limited investment, the power of the amplifier is at least equivalent to the rated power of the speaker, but it is necessary to pay great attention to keeping the sound undistorted. Too small power configuration does not seem to damage the speaker unit, but in fact, too small power is very likely to cause overload clipping, generate a lot of harmonics, and burn the tweeter unit.
2. Generally, the power of the amplifier is recommended to be 1.5 times, and the bass part is better to exceed 1.5 times, so as to get enough power.
3. For applications requiring extremely high acoustics, such as studio monitoring and concert halls, the ideal is twice the power of the speaker (this is consistent with one of the recommended values ​​in the matching standard established by the International Electrotechnical Commission IEC).

Send Inquiry